Tienda | Ritter Machinery

Ritter Machines
R200T Parts
Face Frame Table Parts
Tooling
Used Machinery
Door Clamping Parts
R132 Parts

Drive Cylinder Assembly - 4" Bore - 4" Stroke - 150 psi max - 1,250 lbf @100 PSI $ 540.00 540.0 USD	Elbow, Street, Brass, 1/4" FNPT to 1/4" MNPT $ 5.75 5.75 USD	Exhaust, Breather Vent, Silencer, 1/8" NPT $ 2.00 2.0 USD	HSS Low Profile Pocket Bit Cut Diameter: 9/64 Cut Length: 1 Shank: 1/4 Overall Length: 2-1/2 R2061, R2063 $ 18.00 18.0 USD
Hold Down Cylinder - 2" Bore, 1" Stroke. (Cylinder Only, No Clamp Foot/Pad) - 280lbft at 90 PSI $ 345.00 345.0 USD	Horizontal Borer, 3 Spindle, 32mm Center Standard Features: - Triple Spindle Gear Driven Drill Head - 32mm Spindle Spacing - 10mm Bored Female Collets With Set Screw Lock - 0.75 HP Spindle Drive Motor, TEFC - 0-2" Adjustable Boring Depth - (4) Material Positioning Stops - 2" Bore Clamping Cylinder - Foot Actuated Boring Cycle - 3450 RPM Spindle Speed - 6" X 20" Table Area - Tooling Not Included Technical Data and Specifications: - Electrical: 110/120V, 60Hz, 10A - Air: 80-100 PSI - Work Height: 40" - Footprint: 24" x 24" Shipping Weight: 381 LBS Shipping Dimensions: 38” X 38” X 55” $ 6,190.00 6190.0 USD	Lock Handle, 1/2-13 Ritter H126 Lock Handle $ 17.00 17.0 USD	Lock Handle, 5/16-18 Ritter H120 Lock Handle $ 16.20 16.2 USD
Mount Pin $ 19.78 19.78 USD	O-Ring, 2 3/4" ID $ 3.33 3.33 USD	O-Ring, 3/4" ID $ 3.00 3.0 USD	O-ring, 1-3/4" ID x 1-15/16" OD $ 5.06 5.0600000000000005 USD
Piston Cup, 2" $ 33.44 33.44 USD	Piston Cup, 3" $ 52.88 52.88 USD	Piston Rod $ 24.30 24.3 USD	Pneumatic Foot Pedal, Valve, 2-position, non-locking (Momentary) $ 102.00 102.0 USD
Pressure Switch, 40-100 PSI, 40-20 PSI Reverse Action - 2 NO Snap Action DPST $ 81.33 81.33 USD	R200T Single Spindle Pocket Hole Drill Standard Features: - 1.5 HP Spindle Drive Motor, TEFC - Foot Actuated Boring Cycle - 14 Degree Single Spindle - 6,100 RPM Spindle Speed - 24" x 30" Table Area - Adjustable Fence with (2) Stops - Tooling Included - Interchangeable Head with R220T Technical Data and Specifications - Electrical: 110/120V, 60Hz, 20A - Air: 80-100 PSI - Work Height: 38.25" - Footprint: 34.5" x 25.25" Additional Options: - R200T3 – 230/460V, 3Ø, 60Hz Shipping Weight: 561 LBS Shipping Dimensions: 33” X 43” X 51” $ 7,390.00 7390.0 USD	R2061 Low Angle Pocket Cutter Standard Features: - 6° Low angle - PLC controlled cycle - Foot pedal operated - Adjustable Material Stops - Up to 2" thick material - Cycle Time: 1.75 - 2 Sec - Tooling Included Technical Data and Specifications: - Router Bit: 3/8” Solid Carbide, Rough Mill - Drill Bit: 9/64” Brad and Spur TiN-Coated Bit - Router: 24,500 RPM, 11 A, 1.75 HP - Drill: 31,000 RPM, 4.5 A, 7/8 HP - Electrical: 110V 15A - Air: 2 CFM at 80 - 100 PSI - Work height: 36" - Footprint: 27.75" x 20.5" - Table Area: 15.75" x 23.75" - Dust Port: 4" - Shipping Weight: 350 LBS - Shipping Dimensions: 45" x 32" x 56 $ 5,290.00 5290.0 USD	R220T Double Spindle Pocket Hole Drill Standard Features: - 1.5 HP Spindle Drive Motor, TEFC - 1" Spindle Centers - Manual Controls, 120 V - Foot Actuated Boring Cycle - 14 Degree Double Spindle - 6,100 RPM Spindle Speed - Ball Bearing Collet Guide Bushing Block - 24" X 30" Table Area - Adjustable Fence with (2) Stops - Tooling included Technical Data and Specifications: - Electrical: 110V, 1Ø, 60Hz, 20A - Air: 80-100 PSI - Work Height: 38.25" - Footprint: 34.5" x 25.25" Additional Options: - R220T3 – 230/460V, 3Ø, 60Hz - Shipping Weight: 561 LBS - Shipping Dimensions: 33" x 43" x 51" H $ 7,990.00 7990.0 USD

Don't see what you are looking for?